m3gusta Posted October 16, 2022 Report Share Posted October 16, 2022 Attached are my logs and tune. I get these errors intermittently, they can both be seen at the beginning of the attached log. I don't use an E-Throttle, is there a way to hide or disable the Aux 9/10 error? And what can I check for a Lambda sensor taking too long to heat up? PC Datalog - 2022-10-14 2;54;25 pm.llgx S52_02.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 16, 2022 Report Share Posted October 16, 2022 For the aux9/10 supply error, this is because pin B5 voltage is low. In your map the battery voltage (pin A5) was 11.9V, but pin B8 was only 10.4V. You cant disable this error as this supply is needed regardless of using E-throttle or not. For the lambda I would say you also have low voltage at lambda connector pin#4. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.