Mustang Posted October 16, 2022 Report Share Posted October 16, 2022 Atom G4x on a Fiat 1.4 T-Jet engine with stock 60 - 2 Trigger wheel and Mag Sensor. Customer says that the Trigger wheel Offset is 17 teeht, - 102°. He counted the teeth from the wheel Gap to Sensor Center. Stock Engine Management is Bosch ME 7.9.10. All Bosch 60-2 Trigger System i know have either 20 teeth - 120° or 15 theeth - 90° i have never seen a Bosch 60 - 2 Trigger System with 17 teeth - 102° Offset. I have no acess to the Car / Engine to check it myself. So it would be fine if anyone here knows the correct stock Trigger Offset for the Fiat 1.4 T - Jet engine. Thanks Marc Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 16, 2022 Report Share Posted October 16, 2022 9 hours ago, Mustang said: He counted the teeth from the wheel Gap to Sensor Center. The important measurement (assuming VR sensor) would be the angle from the centre of the tooth after the gap to the centre of the sensor. For example the offset would be about -62deg in the example below. For reference I found this post below for a 1.2 Fiat, this user also says tooth 17. Quote Link to comment Share on other sites More sharing options...
Mustang Posted October 17, 2022 Author Report Share Posted October 17, 2022 Adam, thanks for your answer. found at the engine salvage yard a 1.4 T - Jet engine, tooth 17 is correct. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.