K4Tuning Posted December 2, 2022 Report Share Posted December 2, 2022 Hey all Evo 9 PnP G4X. Im kind of confused about something and i want to make sure i have my knock control tables set up properly. The evo is a wasted spark system,,, but i have a spoolin up direct coil on plug set up on the car.. Although there are individual coils,, the car still operates as a wasted spark system. soo coils 1 and 4 fire at the same time as well as 2 and 3 firing at the same time. I believe i have my knock tables set up as individual cylinder knock control where im thinking i need to set it to where knock tables 1 and 4 are the same and 2 and 3 are the same to operate with the wasted spark setup.. Does this sound correct? I can post a link to my current map and the last dyno tune session i did to the car. Car runs and drives great so far. Tune is very soft, no boost control yet only wastegate 18psi 445/370 on a mustang.. Thanks for any input and information!! https://drive.google.com/drive/folders/1ctVovrKJeoLEI08LdHJdPDSUOxaj20xI?usp=share_link Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 2, 2022 Report Share Posted December 2, 2022 G4X can still do individual cylinder knock control with wasted spark ignition (or even with a distributor and single coil…), provided it has a trigger system capable of 720sync (the evo has). mapper and K4Tuning 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.