Zac Posted December 7, 2022 Report Share Posted December 7, 2022 Hi there, Is there a way in a link g4x to use the tacho to show for example boost levels? e.g. boost level 1 shows 2000rpm and boost level 2 shows 3000 rpm? Quote Link to comment Share on other sites More sharing options...
Confused Posted December 7, 2022 Report Share Posted December 7, 2022 There was a similar thread here which might give you some suggestions and ideas on how this might work Quote Link to comment Share on other sites More sharing options...
Zac Posted December 8, 2022 Author Report Share Posted December 8, 2022 Thanks for the quick reply. I used a timer for the switch logic so that it would activate for 1 second, then deactivate. What i found however is it seems being an r33 gtr, their hicas light must linked up to the wiring somehow, and flashes on and off during this instance. Decided i wouldn't try further as it was only an idea out of curiosity for a visual for boost levels when a boost switch is added in the future. Setting the gp pwm 1 as aux 4, removes the tacho from the aux and switches it out, meaning it would lose normal rpm gauge function? Didn't test much into it. I assume i might be able to set it up similar to how i set up my check engine light, where i use a virtual aux and its function within the ecu (in this case; Tacho) that way it will be able to be used how i intend. Any inputs on the setup would be much appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.