Supercrown Posted February 1, 2014 Report Share Posted February 1, 2014 Hi guys - I bought my V88 a fair while ago but am only now setting it up on the car. (has a serial in the 4000's and has been back to Vipec for an upgrade to current spects 12 months ago). There is a MAP and IAT sensor in the box and I just want to check that they are still good. (The IATs is what came with the ECU a few years ago and the MAPs is one I ordered through my Vipec dealer) The MAP sensor is a 5 BAR one I think. (I don't remember ordering it LOL) Yes? I'd also forgot there was an IAT sensor with it, so have been sorting out one of the Bosch 0 280 130 085 sensors recommended in the current manual download. When I checked in the box, the AIT that is in there is not the Bosch 0 280 130 085 unit. (see picture below) So - how does the calibration of this sensor compare to the default Bosch 0 280 130 085 IAT calibration that should be in my ECU? (as the ECU was sent back to be upgraded 12 months ago I'm assuming that the default calibration is for the Bosch 0 280 130 085 listed in the current manual) If the calibration is different, could you please let me know the specs for the one shown in the image below? Cheers Quote Link to comment Share on other sites More sharing options...
Simon Posted February 3, 2014 Report Share Posted February 3, 2014 That map does look to be a 5bar going off the part number. The IAT you have there is fine to use and is our most often supplied. The scaling is Delphi AC IAT Quote Link to comment Share on other sites More sharing options...
Supercrown Posted February 3, 2014 Author Report Share Posted February 3, 2014 Nice. Thanks Simon. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.