shrug Posted January 8, 2023 Report Share Posted January 8, 2023 If I matched the trigger pattern could it be used on a 4 cylinder? Or does it fire ignition odd for rotary? Quote Link to comment Share on other sites More sharing options...
shrug Posted January 16, 2023 Author Report Share Posted January 16, 2023 Surely someone that’s works at link knows how the firing works on a g1 rotary ecu and if it’ll work on normal piston engines with a matched trigger pattern? Quote Link to comment Share on other sites More sharing options...
Simon Posted January 16, 2023 Report Share Posted January 16, 2023 It will depend on the firmware that the ECU has. If its running D42V5 then it could be converted over to another application relatively easy. If it is on older rotary specific firmware then it would have to have the micro replaced to suit a piston application. Best bet will be a photo of the inside of the ECU to confirm. Sorry about the slow response been away on holiday and no one else knows the G1s Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.