kevin p Posted February 4, 2023 Report Share Posted February 4, 2023 Hi Everyone, Do the 350Z G4X reads the factory air fuel sensors our would I need to add aftermarket? Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 4, 2023 Report Share Posted February 4, 2023 No, you will need to fit your own wideband controller and sensor. Quote Link to comment Share on other sites More sharing options...
kevin p Posted February 5, 2023 Author Report Share Posted February 5, 2023 Ok, thanks. How do you clear your attachments files on the forum? Quote Link to comment Share on other sites More sharing options...
castillaricardo Posted February 5, 2023 Report Share Posted February 5, 2023 You can edit the post that has the attachment, and delete it. You can find the posts under Account > My Attachments Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 5, 2023 Report Share Posted February 5, 2023 4 hours ago, kevin p said: How do you clear your attachments files on the forum? It is nicer if you dont. If anyone is looking for help on the same topic in future and find old related posts, they are a lot less helpful when all the relevant files have been deleted. castillaricardo 1 Quote Link to comment Share on other sites More sharing options...
kevin p Posted February 7, 2023 Author Report Share Posted February 7, 2023 Ok, will do. I am having an issue with the cam gear/gears making random noise, I don't recall hearing the noise on the stock ecu. Is there an adjustment that can be made to fix this? Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 7, 2023 Report Share Posted February 7, 2023 Share a log and the tune. Use something like google drive, one drive, dropbox or similar and generate a share link. When does the noise happen - only during startup or any random time? Quote Link to comment Share on other sites More sharing options...
kevin p Posted February 7, 2023 Author Report Share Posted February 7, 2023 https://drive.google.com/file/d/126KMFbtceWzyYM1_WFZ6FBcvJHsgvfrl/view?usp=share_link https://drive.google.com/file/d/1xru4NSEaqeB63iuajfzTxJfwkpt87mg2/view?usp=share_link No so much at start up, more so at part throttle or deceleration Quote Link to comment Share on other sites More sharing options...
Paddyx21 Posted June 9 Report Share Posted June 9 Hey sorry for my question but.. can i install on the link ecu G4X a „normal“ Bosch lsu4.9 with a wideband Controller that have a Output Signal 0-5V? How Can i wire this ? Or do i need the lambda can Controller? It is Really expensive thanks Quote Link to comment Share on other sites More sharing options...
kevin p Posted June 9 Author Report Share Posted June 9 You can install pretty much any wideband gauge or controller with the 0-5v output. Connect the signal wire to the lambda analog found in the analog input and set it up there. Enter the values from the controller that you're using and that's it.. Paddyx21 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.