k fuku Posted March 9, 2023 Report Share Posted March 9, 2023 When ECU hold power is enabled and IG is turned off, the AUX duty controlled equipment goes out of control. Hold power time is set to 3 equal. After IG is turned off, the devices controlled by the CAN connection malfunction only during the three seconds that the LINK ECU is shut down. Is there any countermeasure? I am thinking that it is probably the same if I control the chassis power supply with a power relay for the equipment that goes out of control. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 9, 2023 Report Share Posted March 9, 2023 So is the streering motor only connected via CAN, there is nothing connected to an aux output? k fuku 1 Quote Link to comment Share on other sites More sharing options...
k fuku Posted March 9, 2023 Author Report Share Posted March 9, 2023 3 hours ago, Adamw said: So is the streering motor only connected via CAN, there is nothing connected to an aux output? Sorry, I solved it myself. It was due to the fact that I had set the AUX enable condition to IG on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.