Jump to content

Link Fury G4+


Schalk

Recommended Posts

No, in my experience the systems that try to use the built-in mechatronics unit by mimicking the VW chassis CAN messages give pretty crap control and you will spend weeks/months reflashing the mechatronics unit continuously trying to get an acceptable shift.  The best option if the gearbox is not in the original intended chassis is HTG or one of the other similar dedicated TCU's.  These however require removing the original electronics from inside the mechatronics unit and bringing all the connections out to the new external controller.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...