ae82ted Posted March 17, 2023 Report Share Posted March 17, 2023 Hi All, Since the Link G4X plugin ECU for RX7 is not supporting the stock sequential turbo. Does anybody have an idea how the easiest way to get those twins to run in parallel with Link G4X. Is it the exhaust manifold flap MUST be deleted mechanically as well as the charge Y pipe flap too? Or I can leave it as it is and just tune it? Thanks a lot! Quote Link to comment Share on other sites More sharing options...
koracing Posted March 17, 2023 Report Share Posted March 17, 2023 Personally I'm not familiar with the factory setup on the RX7 twin turbos, but have messed with some OEM supra twin turbo setups. If you have a vacuum diagram of how the various lines are run to the actuators and any vacuum switching valves (VSVs) that *may* be controlled by the ecu then it may be possible to set up the logic to do what you want in the Link. Quote Link to comment Share on other sites More sharing options...
ae82ted Posted March 17, 2023 Author Report Share Posted March 17, 2023 Thanks, Supra is easy. just remove the actuator and latch the flap at the exhaust manifold with a wire. but seems the 13B is different. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.