Cnstman Posted May 15, 2014 Report Share Posted May 15, 2014 According to this post http://www.linkecu.com/forums/link-g4-e ... #320657273 there is an issue with the LINK and 2D launch control. Does this also affect the I88 Plug-in for my Subaru (V10) 2004 STi USDM? I am racing this weekend and trying to dial in launch control, don't want to be chasing my tail if 2D has an issue. How can 3D be setup to work like 2D? I really just need a single stationary launch setting that deactivates at a set speed. Thanks!! Aaron. Quote Link to comment Share on other sites More sharing options...
Simon Posted May 19, 2014 Report Share Posted May 19, 2014 Yep it will apply to the I series as well. You can use the 3D mode then set one of the Axis options to none. Effectively giving a 2D table. Quote Link to comment Share on other sites More sharing options...
Cnstman Posted May 19, 2014 Author Report Share Posted May 19, 2014 The 2D is rpm vs ground speed. Ground speed is not an option for the 3D table. I use LF wheel speed for un-driven wheel speed, would this work for my launch control as well? Thanks for your help. Quote Link to comment Share on other sites More sharing options...
Simon Posted May 20, 2014 Report Share Posted May 20, 2014 Yep that would work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.