Craig Tickle Posted April 25, 2023 Report Share Posted April 25, 2023 Hi, I'm in the process of converting an early 80's Fiat Twin cam to EFI. The plan was to add Bosch sensors to act as cam & crank sensors with suitable custom trigger wheels / targets attached. However when I pulled the distributor apart, I found it had a reluctor sensor in it, not the points I was expecting. When spun up with a drill, it gives the signal below. Is using it as a cam angle sensor as simple as grinding off three of the pointy bits and wiring it in as trigger 2. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 25, 2023 Report Share Posted April 25, 2023 Yes that would be fine. Quote Link to comment Share on other sites More sharing options...
kaptainballistik Posted April 28, 2023 Report Share Posted April 28, 2023 Can you get hold of a Delta CAS? (8v Type) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.