krappy Posted April 29, 2023 Report Share Posted April 29, 2023 I am having trouble calibrating the onboard MAP/BAP on a NS15X G4X PNP ECU. Is there something wrong with my onboard MAP and/or BAP sensor? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 29, 2023 Report Share Posted April 29, 2023 MAP calibration should be 7Bar Quote Link to comment Share on other sites More sharing options...
jdniss Posted April 30, 2023 Report Share Posted April 30, 2023 Hi, I have the similar issue I was going to open a post about - same NS15X - onboard 7bar MAP sensor connected to AN Volt 3. Attempted calibration probably 15 times with varying levels of success - oddly changing between KPA and PSI units in the G4X Software allowed a successful calibration until the next ECU power up where for memory the MAP and BAP values were somewhere around the 105 ~ 106kpa mark prior to startup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.