turbodude Posted August 7, 2014 Report Share Posted August 7, 2014 Hi guys need help getting the shift light to work. I have a 12v led wired in with a relay on Aux8 signal triggering the relay. St205 plug in unit. GP output on Aux 8. I have the aux 8 trigger going to the switch of the relay, and the relay itself triggering the led, but it doesnt work. Any clues? Quote Link to comment Share on other sites More sharing options...
Simon Posted August 8, 2014 Report Share Posted August 8, 2014 Have you tried using test on to see if the LED / relay will switch? Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted August 8, 2014 Report Share Posted August 8, 2014 Hi, sorry Simon beat me to it, I have been at a funeral but I will post this info for you anyhow. Click on each picture to get full image. If you don't like the flashing light simply put the PWM table values at 100, this will leave the light on solid. The lower the number the slower the LED will blink. Regards Dave Quote Link to comment Share on other sites More sharing options...
turbodude Posted August 8, 2014 Author Report Share Posted August 8, 2014 i figured it out, i think it was because i was on a GP Output i couldnt trigger the relay. so i ended up putting the light on a switched 12v, and have the GP output switch on the ground and it works everytime now. Quote Link to comment Share on other sites More sharing options...
turbodude Posted August 8, 2014 Author Report Share Posted August 8, 2014 thank you!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.