Ammar Alqisi Posted May 15, 2023 Report Share Posted May 15, 2023 Hello, I attached the files for link ecu and pdu setup, all is going well, but we have one question, we need to activate the NOS request from ecu to PDU, setting on ECU done, but how we can make it works on PDU ? Charles racecar.pclr charles sa14.pmu Quote Link to comment Share on other sites More sharing options...
dx4picco Posted May 15, 2023 Report Share Posted May 15, 2023 is it dry or wet nitrous? how are the solenoid wired? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 15, 2023 Report Share Posted May 15, 2023 The attached files I have set up Aux 1 to be sent to the PMU, this is received into the PMU as input channel "ECU NOS Request". I have not set up any control logic in the PMU. charles sa14 CAN from ECU.pmu Charles racecar CAN to PMU.pclr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.