Jump to content



Recommended Posts

Auxiliary output does not works

Main code firmware version -

Boot firmware 1.6

Main Board revision 1.3

ECU type I88

ECU serial number 18580

Function conditions set - shift light

Aux -1

Cond 1 OR 2

Less than 500 RPM

Greater than 7500 RPM

key on engine stop - LED on.

key on engine rum (1250) - led off - above 7500 rpms - led on

Using LED connected to 12 volts through 1k resistor and auxiliar output 1 pin ecu,

the way explained in this manual pag 71.

It does not work ?


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...