augusto Posted February 22, 2015 Report Share Posted February 22, 2015 Auxiliary output does not works Main code firmware version - 5.3.1.2359 Boot firmware 1.6 Main Board revision 1.3 ECU type I88 ECU serial number 18580 Function conditions set - shift light Aux -1 Cond 1 OR 2 Less than 500 RPM Greater than 7500 RPM key on engine stop - LED on. key on engine rum (1250) - led off - above 7500 rpms - led on Using LED connected to 12 volts through 1k resistor and auxiliar output 1 pin ecu, the way explained in this manual pag 71. It does not work ? Augusto Quote Link to comment Share on other sites More sharing options...
Simon Posted February 23, 2015 Report Share Posted February 23, 2015 Hi Augusto Can you post your map so we can load it into an ECU on the bench for testing. Quote Link to comment Share on other sites More sharing options...
augusto Posted February 24, 2015 Author Report Share Posted February 24, 2015 Hi excuse me put the inverted led. Augusto. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.