zspanners Posted June 30, 2015 Report Share Posted June 30, 2015 Hi Guys , anybody got a config and set up file for a JZX110 with Link G4 Fury running as a piggyback for fuel and ignition. This is using a plug in loom from the USA. Std injectors GM 3 bar map. Thanks. zspanners Quote Link to comment Share on other sites More sharing options...
Simon Posted June 30, 2015 Report Share Posted June 30, 2015 You could likely use the Supra plugin map and then reconfigure all the I/O to suit the harness you are using. Im assuming its a non vvt motor? Quote Link to comment Share on other sites More sharing options...
JMP Posted July 1, 2015 Report Share Posted July 1, 2015 JZX110 is a drive by wire vvti 1jz with waste spark ignition same as the vvti 2J. You can use the Supra basemap fuel and ignition maps as a guide, are you leaving the stock ECU in control of the throttle and auto? Wiring in a new intake air temp sensor in a post intercooler location also? You can use the attached file as a guide, will need all the inputs/outputs reviewed and reconfigured based on how the patch loom is pinned. Would also need the usual DBW configuration/calibration. G4+ Fury DBW JZ Sample.pclr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.