impellerhead Posted June 12, 2009 Report Share Posted June 12, 2009 Why is it not possible to choose to cut fuel on the rpm limit? I will probably blow my methanol high boost drag engine to bits if I reach rpm limit with ignition cut. I would very much like to see this option in PcLink soon! Fuel adjustment on the traction control settings would also be nice. Quote Link to comment Share on other sites More sharing options...
Simon Posted June 17, 2009 Report Share Posted June 17, 2009 If you set your limit to 'hard cut only' this will stop fuel and ignition. Quote Link to comment Share on other sites More sharing options...
Phil Williams Posted June 19, 2009 Report Share Posted June 19, 2009 By fuel adjustment do you mean limit method or mixture correction? Quote Link to comment Share on other sites More sharing options...
impellerhead Posted June 20, 2009 Author Report Share Posted June 20, 2009 I wish to cut only fuel on the rpm limit and I wish to have fuel correction on the traction control settings. Quote Link to comment Share on other sites More sharing options...
Phil Williams Posted June 22, 2009 Report Share Posted June 22, 2009 At the moment a fuel only cut is avaliable only with launch control. In future firmware releases, the cut method for limiting will be fully adjustable. As far as fuel correction on traction control, nothing specific is avaliable or planned for release. Although tables will become far more flexiable in a future firmware release which would allow you to set up a system for this. Regards, Phil Link ElectroSystems Ltd Quote Link to comment Share on other sites More sharing options...
impellerhead Posted July 2, 2009 Author Report Share Posted July 2, 2009 How soon will be fuelcut in the rpm limit be available? I heard that a methanol drag car here in Sweden recently blew his engine recently because his engine management system didn't have fuelcut as rpm limit. Quote Link to comment Share on other sites More sharing options...
Phil Williams Posted July 2, 2009 Report Share Posted July 2, 2009 Hi, Sorry I have made a mistake, fuel cut only is avaliable during normal rev limiting aswell as launch control. Regards, Phil Quote Link to comment Share on other sites More sharing options...
Phil Williams Posted July 10, 2009 Report Share Posted July 10, 2009 Are you running the latest firmware? This control over limit method was only added recently. See our support section of the website for the lastest ECU firmware and PCLink version. Regards, Phil Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.