Fintank11 Posted May 26, 2023 Report Share Posted May 26, 2023 Hi All, Starting to wire up my g4x and will be running a link can lambda. On my pin out (Loom A) I don’t have a can high or can low pin labelled. My question is , can this be used in aux 7&8 ? Quote Link to comment Share on other sites More sharing options...
Confused Posted May 26, 2023 Report Share Posted May 26, 2023 Which specific G4X do you have? Quote Link to comment Share on other sites More sharing options...
Fintank11 Posted May 26, 2023 Author Report Share Posted May 26, 2023 Can this model take one or do I just use a normal lambda sensor ? thanks Quote Link to comment Share on other sites More sharing options...
Confused Posted May 26, 2023 Report Share Posted May 26, 2023 From the Help: So, looks like you'll connect your Link CAN Lambda module's CAN H and CAN L to pins 28/29 The Help within the PC Link application is exceptionally good, the best Help I've seen in 20+ years in the software industry. Quote Link to comment Share on other sites More sharing options...
Fintank11 Posted May 26, 2023 Author Report Share Posted May 26, 2023 Thank you so much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.