HarryBeron Posted June 7, 2023 Report Share Posted June 7, 2023 Hi Team, I'm trying to send virtual Fuel tank information to my Powertune Display. I have followed the instructions by setting the User stream to 3 and Can id to 1100 and transmit rate to 20hz as per the instructions. Then added Custom frame to Stream3 with the values they shown in the instructions. But for the life if me i cant get it to show in the display. I can get what I want to see on PC link software. (attached Images) Help...... I'm frazzled and need someone smarter than me to guide me. Cheers DenisAlmos 1 Quote Link to comment Share on other sites More sharing options...
ae82ted Posted June 7, 2023 Report Share Posted June 7, 2023 Im trying to do the same with the 350z plugin g4x. How do you know the CAN ID for fuel level is 1100? I guess you may need to add a custom CAN channel at PowerTune Dash to recieve the data u transmit. The preset dbc at powertune shouldt included this for link ecu. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 7, 2023 Report Share Posted June 7, 2023 The image from Powertunes document "Link Analog input setup" below shows Fuel level on frame ID 2 with start bit 55 which is different to what you are using. I dont know if these are user definable in the dash. Can you show us how you have these custom channels set up in the dash? Quote Link to comment Share on other sites More sharing options...
ae82ted Posted June 8, 2023 Report Share Posted June 8, 2023 Hi Adam, How i can get the fuel level data out on 350Z plugin? I believe the 350Z is running via CAN signal for fuel level in stock form. maybe im wrong. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 8, 2023 Report Share Posted June 8, 2023 The ECU does not receive fuel level. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.