kevin p Posted June 12, 2023 Report Share Posted June 12, 2023 Hi everyone, I have the knock feedback setup and for some reason it's not working. I've done this plenty of times so I find it a bit odd that I can't figure it out. Thank for the help and extra pair of eyes. https://drive.google.com/file/d/1DBLjkYFqnI3jCda_jQI8z37usKGKIe5k/view?usp=drive_link https://drive.google.com/file/d/1yVmYzUZmaQ6kCPWXwysXs2ehxUqbJLdz/view?usp=drive_link Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 12, 2023 Report Share Posted June 12, 2023 Your shared links are restricted access, you need to go back into the share settings and change it to the option that is something like "anyone with link" Quote Link to comment Share on other sites More sharing options...
kevin p Posted June 12, 2023 Author Report Share Posted June 12, 2023 Sorry about that Adam https://drive.google.com/file/d/1DBLjkYFqnI3jCda_jQI8z37usKGKIe5k/view?usp=sharinghttps://drive.google.com/file/d/1yVmYzUZmaQ6kCPWXwysXs2ehxUqbJLdz/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 13, 2023 Report Share Posted June 13, 2023 I think this must be a firmware issue as I can see many of the knock load variables are constantly zero. Possibly something to do with the rotary engine cycle or ign sequence that was overlooked. I will pass this on to the firmware team to have a look. Actually I just noticed you dont have the cylinder allocated to knock tables. Can you fix that then confirm if your results look more like expected. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.