Wastgate323 Posted July 2, 2023 Report Share Posted July 2, 2023 I need help with the Stream for Plex Display. MAP, ECT, OIl Pressure etc works well. But EGT only in the beginning. If the temperature rises higher, the display starts from the beginning. For example; 150deg. egt shows as 150deg. egt. But 250deg. egt shows as 50deg. egt RX8fertig.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 2, 2023 Report Share Posted July 2, 2023 The ecu is not even transmitting EGT. So I guess the plex device is reading EGT directly from the EGT device. Quote Link to comment Share on other sites More sharing options...
Wastgate323 Posted July 3, 2023 Author Report Share Posted July 3, 2023 sorry, my mistake. Yes, the ECUmaster EGT sends this data directly to the Plex. Is this a problem? So most of the data comes from the Link ECU and the EGT from ECUmaster. But everything is on the same ID. In PCLink i see the right EGT. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 3, 2023 Report Share Posted July 3, 2023 This means the CAN config for the EGT in your usdm100 is incorrect. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.