Subiguy1 Posted July 7, 2023 Report Share Posted July 7, 2023 I need some insight on how i my screen set up should be so i can easily tune each variable i.e.. fuel, boost, ignition, ect. What types of logging parameters should i be logging primarily im trying to tune ignition timing easily. ive attached my fueling page just as an example of what i have, roast me if im doing it wrong! Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 8, 2023 Report Share Posted July 8, 2023 If you load the supplied 1920 x 1080 or the 1366 x 766 layouts they were made by me based mostly on how my own laptop was setup. Everybody does things a bit differently though, im mostly tuning fuel and ign steady state on a dyno, someone road tuning fuel for example would probably use a mixture map page more or a separate page with a timeplot and fuel table together to tune from logs using the quick trim function. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.