Dj_Barb Posted July 20, 2023 Report Share Posted July 20, 2023 I am looking to connect my Link G4X to Realdash via an Eonon Android screen. What is the best method of connecting the two together for fastest response times as I wish to display ECU data. Many thanks. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 20, 2023 Report Share Posted July 20, 2023 Any of the supported CAN options work well. There are wireless or wired options, both work equally well and setup is pretty much the same. https://realdash.net/manuals/supported_can_lin_analyzers.php Dj_Barb 1 Quote Link to comment Share on other sites More sharing options...
Dj_Barb Posted July 20, 2023 Author Report Share Posted July 20, 2023 Thanks Adam, that is great. I am using a GX4 3sgte p&p. Where is the best place to wire to. I remember reading I can splice into my CAN Wideband but I don't like the idea of this. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 20, 2023 Report Share Posted July 20, 2023 Your ECU has 2 CAN ports, you can use either one. It is fine to connect multiple devices all to the same bus, this is exactly what CAN is designed for. Dj_Barb 1 Quote Link to comment Share on other sites More sharing options...
koracing Posted July 20, 2023 Report Share Posted July 20, 2023 Link does offer a CAN TEE to split one 4 pin can plug to two to connect another CAN device. Dj_Barb 1 Quote Link to comment Share on other sites More sharing options...
Dj_Barb Posted July 21, 2023 Author Report Share Posted July 21, 2023 Great thanks for this information, I'll defo look into that Tee which you suggested. Many thanks. Dan. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.