ndm-steve Posted July 21, 2023 Report Share Posted July 21, 2023 HI guy's, great forum, lot's of detail. I've been considering a standalone for awhile and I'm wondering if it's possible to hardwire into all my oe sensor's. Dbw, cam and crank , map and vvt. Is it possible to effectively calibrate a new ecu to existing sensor's. She's an m16a Suzuki Swift. Thanks in advance, Steve Quote Link to comment Share on other sites More sharing options...
Confused Posted July 21, 2023 Report Share Posted July 21, 2023 Pretty much, yeah! A lot of sensors are pretty generic, and will already be catered for in the ECU, but if not, the Link allows you to create custom calibrations for sensors anyway! Quote Link to comment Share on other sites More sharing options...
ndm-steve Posted July 21, 2023 Author Report Share Posted July 21, 2023 That's kinda what I thought to be honest. Music to ears.. thank you for the information, your prompt reply. Regards Steve Probably not the correct location to post this..but here goes... I'm working my way through fitting zx12r throttle bodies on a jenvey manifold. I was hoping to use the oe dbw motor to activate the itb,s but to be honest I'm starting to think a stand alone ecu with cable throttle is gonna be best..my question is..is the g4x atom sufficient for me. I do want drop the wasted spark and run individual coils. Thanks again Regards Steve Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 22, 2023 Report Share Posted July 22, 2023 The Atom doesnt do VVT control so you would need a Monsoon as a minimum. Quote Link to comment Share on other sites More sharing options...
ndm-steve Posted July 22, 2023 Author Report Share Posted July 22, 2023 Thanks Adamw. Quote Link to comment Share on other sites More sharing options...
ndm-steve Posted July 30, 2023 Author Report Share Posted July 30, 2023 Morning all, I'm pretty sure that I'm going to need to bypass the dbw system on the swift to get the throttle bodies to function anyway properly. Before I buy the monsoon system, am I correct in thinking she will run four IGN coils, vvt, map and tps with a wide band O2, or do I need to go further up the food chain. Thanks in advance Regards Steve Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 30, 2023 Report Share Posted July 30, 2023 5 hours ago, ndm-steve said: am I correct in thinking she will run four IGN coils, vvt, map and tps with a wide band O2, Yes, the Monsoon generally takes care of a 4Cyl well. Enough IO to do all the basics you mention as well as fuel pump, fan, knock control, tacho, etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.