greenisacolor Posted September 11, 2023 Report Share Posted September 11, 2023 I have my trans temp sensor wired to AN Temp 1 off the expansion harness. I have been trying to get this data to transmit to the gaugeart canbus gauge but I’m having no luck. Per the instructions I am supposed load the .lcs file to the new stream for channel 50 but those files don’t exist in the Can folder. I have the most recent version of pc link. Not sure if the lcs file is what’s causing my issue or if I have the parameters for the stream configured incorrectly Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 11, 2023 Report Share Posted September 11, 2023 You are posting in the G4 section, do you have an old G4 ecu? The G4 didnt have a customisable CAN output, only a fixed stream. Quote Link to comment Share on other sites More sharing options...
greenisacolor Posted September 11, 2023 Author Report Share Posted September 11, 2023 Sorry, meant to post in G4+. Attached is how I have the streams currently setup Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 14, 2023 Report Share Posted September 14, 2023 Can you attach the tune. Stream 1 on ID 50 is meant to contain Ethanol content and temp, boost target and knock level/count, so putting any random data in there is not going to work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.