Wastgate323 Posted September 17, 2023 Report Share Posted September 17, 2023 I have a issue with my ECU log parameters. In the log setup i have selected CAN TC1 and something other. But in the log they are missing. If i start logging with pc it works. Thank for help Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 17, 2023 Report Share Posted September 17, 2023 It seems you are looking at an old log from before the changes were made. Are you sure a new log has been recorded since and you are looking at the latest one? Watch the "log memory use" runtime and make sure it increments by at least 0.01% before you try to download, otherwise it is not saved to memory yet. You can view list of what has been recorded in the ECU log file download screen. Quote Link to comment Share on other sites More sharing options...
DerekAE86 Posted September 17, 2023 Report Share Posted September 17, 2023 Remember to store to ECU after you've made changes to which parameters get logged. Quote Link to comment Share on other sites More sharing options...
Wastgate323 Posted September 23, 2023 Author Report Share Posted September 23, 2023 Thank you so much, now it works. I have delete the old logs. and store the settings again, now i see everything i want in the logs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.