GabRheault Posted September 30, 2023 Report Share Posted September 30, 2023 Hi guys Can anyone send me and example of program both PDM link and G4X with Can communication between both module. Thanks Gabe Quote Link to comment Share on other sites More sharing options...
aerace_fab Posted September 30, 2023 Report Share Posted September 30, 2023 Give us some context of what you got going on. ecu you're using, keypad, CAN 1/2 will most functions be controlled by the ecu or vise versa. What items are you wanting to power with the pdm (fuel pumps, fans, starter, lights, etc..) ? Quote Link to comment Share on other sites More sharing options...
GabRheault Posted October 1, 2023 Author Report Share Posted October 1, 2023 ecu= g4x keypad = whole sale horpower 12 buttons can 2 used on g4x pdm function= fuel pump, water pump, starter, fan, wiper, light I have got a wide band with an AEM dash. the wide band communicates to the AEM dash. The goal is to have the ecu, pdm wideband keypad and aem dash working on can bus network Quote Link to comment Share on other sites More sharing options...
GabRheault Posted October 4, 2023 Author Report Share Posted October 4, 2023 any reason why when using find device, configure device menu is grey ? see picture also, once configure in the can setup, the pdm should appear in the can tree ecu setting ? see picture 2. I have seen other program and seems like pdm appear in the tree Quote Link to comment Share on other sites More sharing options...
Vaughan Posted October 4, 2023 Report Share Posted October 4, 2023 4 minutes ago, GabRheault said: any reason why when using find device, configure device menu is grey ? see picture There currently is any configuration that PCLink can do of the Razor PDM. To configure the PDM use the USB cable and PDMLink. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 4, 2023 Report Share Posted October 4, 2023 1 hour ago, GabRheault said: also, once configure in the can setup, the pdm should appear in the can tree ecu setting ? see picture 2. I have seen other program and seems like pdm appear in the tree Most likely you have old firmware in your ECU from before the PDM functionality was added to G4X. PC link will only show functions that your firmware/hardware is capable of. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.