offro Posted January 11 Report Share Posted January 11 I am finally getting a little control over DBW. However, I am still struggling and working hard. Thanks again for all your help. I got the CANLambda controller from the dealer, but I am having a little trouble with it because it does not come with a wiring diagram. I could sort of guess that the CAN connector connects to the pins on the ECU. But can you tell me if the red and black stranded wires connect to 5V and ground or 12V and ground? Sorry this is very rudimentary. Quote Link to comment Share on other sites More sharing options...
essb00 Posted January 11 Report Share Posted January 11 You can get download the manual and quickstart guide on the URL below... https://dealers.linkecu.com/can-lambda Quote Link to comment Share on other sites More sharing options...
koracing Posted January 11 Report Share Posted January 11 Here's a link to the actual manual: https://linkecu.com/documentation/canlambda.pdf Pages 9 and 10 have wiring diagrams. Fused and switched 12v, Ground, CAN H and CAN L are the 4 pins on the CAN Lambda. Quote Link to comment Share on other sites More sharing options...
offro Posted January 12 Author Report Share Posted January 12 essb00 Koracing Thanks for the info. I did not notice it because it was not listed on linkjapan. I see that it was listed on the LINK homepage in my home country. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.