S.Masaru Posted February 17 Report Share Posted February 17 please tell me. I am setting the E throttle with a monsoon. It seems that the proofreading is over and there is no problem with the operation, If you use a keyoff, a Fault codes 69 and 75 will appear. I tried various things as I could understand, but I couldn't solve it. Where is the problem? Thank you. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 17 Report Share Posted February 17 Can you get a PC Log showing the fault occurring? If it is only happening when switching off the ignition, that would suggest the ecu is not turning off, maybe a backfeed keeping the ecu alive for a little while after ignition off. Quote Link to comment Share on other sites More sharing options...
S.Masaru Posted February 18 Author Report Share Posted February 18 maybe a backfeed keeping the ecu alive for a little while after ignition off. This comment bothered me, so I re-examined the wiring. It seems that I had misread the main relay wire color on the vehicle's wiring diagram, so I rewired it and the problem was resolved. Thank you for your always accurate advice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.