K24Datsun510 Posted March 17 Report Share Posted March 17 I have a K24 and just install a G4x plug in. I'd switched over from Kpro and the engine was running without issues. Engine cranks but does not start. I'm trying to understand the software. I've unlocked the ECU. I connected a timing light and when cranking the timing light is not flashing which is leading me to there is no ignition signal. I've performed the ignition test and all coils are activating. Here is a link to my google drive with video of pclink when cranking, https://drive.google.com/file/d/1TI7tLygQ8JwqOhsrUKyyhdcSB3-oD7uQ/view?usp=sharing. Let me know where to start. Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 18 Report Share Posted March 18 Attach a copy of your tune and a PC log of a start attempt. Quote Link to comment Share on other sites More sharing options...
Guilty Garage Posted March 19 Report Share Posted March 19 Set your Trigger 1 to falling. I forget which mixture of K24 crank sensors, timing covers, and K20 stuff it was, but I swapped a K24 from Hondata on a K-Swap to Link and that was the solution. Quote Link to comment Share on other sites More sharing options...
K24Datsun510 Posted March 20 Author Report Share Posted March 20 On 3/18/2024 at 6:03 PM, Guilty Garage said: Set your Trigger 1 to falling. I forget which mixture of K24 crank sensors, timing covers, and K20 stuff it was, but I swapped a K24 from Hondata on a K-Swap to Link and that was the solution. This was the issue. The engine is running now thanks for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.