Lawrence martin Posted October 7, 2011 Report Posted October 7, 2011 im trying to setup gear detection 3 4 and 5 are ok and it detects it one but first comes up as 355 on the runtime list but the program only allows up to 200 2nd is around 180 and it won't recognise either of these due to 1st mucking anything up Quote
Cameron Moore Posted October 13, 2011 Report Posted October 13, 2011 What firmware are you running, there were some issues with ratios not working correctly in older firmwares. Regards -Cameron Quote
Lawrence martin Posted October 16, 2011 Author Report Posted October 16, 2011 hi im using 4.8.1.1033 with whatever firmware came with that i have idle timing etc  its only first i have an issue with the others work or will work when 1st is sorted out, i just cant input the number required Quote
Simon Posted October 18, 2011 Report Posted October 18, 2011 Try the just released 4.8.5 firmware. Quote
Lawrence martin Posted October 20, 2011 Author Report Posted October 20, 2011 Hi tried it tonight still the same 2nd through to 5th is fine but the number it produces in the runtime list is too great to input into the table for 1st Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.