Mark Butcher Posted April 25, 2011 Report Share Posted April 25, 2011 Greetings, We have been running a Link G4 plugin with our 2001 Subaru WRX (GDA). We are about to do an engine upgrade to a STI Spec C. There are obviously a few differences. Can you advise me if the engine loom will connect to the WRX loom? And is it just a matter of swapping the jumpers over in the Link? Also do you have any base maps for a 2002 Sti Spec C? No restrictor is fitted. Thanks heaps Mark 0439 966 072 [email protected] Quote Link to comment Share on other sites More sharing options...
Dtech Motorsport Posted April 25, 2011 Report Share Posted April 25, 2011 depending on the exact model and spec the only difference will be variable cam timing versus none so if your current setup did not have variable valve timing then you will need to run that part of the loom to the ecu then use the ver7/8 base map as found in pclink as a start point Regards Dave [email protected] www.dtechmotorsport.com Quote Link to comment Share on other sites More sharing options...
Simon Posted April 26, 2011 Report Share Posted April 26, 2011 Ta Dave you the man. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.