Adamw Posted April 22 Report Share Posted April 22 You have a trigger issue as RPM shows zero when cranking. One issue is the pull-up on trigger 2 is off, so that likely needs to be enabled. And I would say your arming threshold on trigger 1 is probably too high, especially if it cranks a bit slow. Try it like below. Quote Link to comment Share on other sites More sharing options...
Damian Della Posted April 23 Author Report Share Posted April 23 Have made the changes suggested Motor sounds like it wants to fire, thinking I've got the timing out either with the injectors or ignition G4+ injection set up above G4X injection set up Log 2024-04-23 3;58;50 pmcrank test 23042024.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 23 Report Share Posted April 23 Your trigger offset is zero in the G4+ map and 268 in the G4X map. You need to confirm that with a timing light but I would expect similar numbers in both ecu's. Quote Link to comment Share on other sites More sharing options...
Damian Della Posted April 24 Author Report Share Posted April 24 Many thanks, have finally got some noise from the engine from the G4+, now to adjust the tune. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.