Evo6Webby Posted April 22 Report Share Posted April 22 Hi everyone, im after a spot of help. Mitsubishi Evo 6 running Link G4X plug in ecu, as standard the Evo 6 does not have a clutch position switch which is stopping me from making use of the flat foot shifting function. The clutch does have a stopper bolt which is the same length and bolt/thread size as the brake pedal switch. If I purchase the brake pedal switch and the other half of the connector with some wire/cable am i then able to wire it in to the ecu and which pins do i use (or is one just earth to the chassis). on PC link it shows the clutch switch as inactive on DI 10. cheers Webby Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 22 Report Share Posted April 22 Ground one side of the switch and connect the other side to any spare DI. DI10 on pin 46 might be convenient. In the clutch switch settings, turn on the pull-up resistor, and set the active state to whichever setting gives you the correct active/inactive status. I guess it will be active low if they are a normally open switch. Evo6Webby 1 Quote Link to comment Share on other sites More sharing options...
Evo6Webby Posted April 22 Author Report Share Posted April 22 Fantastic, thanks Adam. now I just need to find where to purchase a connector to fit the switch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.