Salmaan Irani1436215438 Posted January 8, 2013 Report Share Posted January 8, 2013 Hi Guys, i am running a G4 Xtreme Red, together with the old ECU (Mitsubishi Airtrek) because of this i splitting the Trigger Signals between the old ecu and new one. both sensors are still being powered by the old ECU. I am using the Evo 5 .pcl and updated all info regarding analog inputs etc based on my setup, i have been trying since yesterday but the engine is not starting. tried resetting all Trigger Calibrations to '0' still nothing. I have done injector and ignition tests and they are fine. Please advise what i should do. pcl file i am using is attached. Also i am running different cams could that have an effect? any assistance will be appreciated. Thank you.airtrek-8-1-2012.pcl Quote Link to comment Share on other sites More sharing options...
Simon Posted January 9, 2013 Report Share Posted January 9, 2013 You will need to turn the pull ups off on the triggers. Are you seeing an engine RPM in PC link? Quote Link to comment Share on other sites More sharing options...
Salmaan Irani1436215438 Posted January 10, 2013 Author Report Share Posted January 10, 2013 I did not see the RPM but will try again today after checking if pull ups are on or off. will let you know what happens. Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.