Stevieturbo Posted February 6, 2011 Report Share Posted February 6, 2011 Im working offline, V3.4 When I right click to change the load axis, and select "Axis Setup", nothing happens. it wont open a menu to allow me to make changes ? Is this a software bug, or must I be online to make changes ? Quote Link to comment Share on other sites More sharing options...
Simon Posted February 7, 2011 Report Share Posted February 7, 2011 On the G3 this is done through the fuel and ignition menus "fuel setup" and "ignition setup" under load axis To add or remove columns right click on the column headings. Same for the rows. Quote Link to comment Share on other sites More sharing options...
Jurgen Biggelaar Posted February 15, 2011 Report Share Posted February 15, 2011 If this works for you Stevie... Just let us know by posting a response so others can make use of the posts. Thanks. Jurgen Quote Link to comment Share on other sites More sharing options...
Stevieturbo Posted February 24, 2011 Author Report Share Posted February 24, 2011 Hi Jurgen. I was able to alter the load axis sites by right clicking on the axis and selecting "insert, remove or adjust" that row or column A slow process but it worked and was able to add/use as many sites as I needed. Although the first 0 ( zero ) row and column could not be adjusted. Thanks for the tip Stevie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.