duncan351 Posted July 7 Report Share Posted July 7 I have looked at so fuel, Limiters, pressure sensors, triggers & I can't find any problems in the log. Problems occurred shortly after 1:50secs. You will see the throttle is 100% but rpms are barely moving, then motor starts to pulling again. I expected to see some signal to drop out with the engine does but I don't see it. What am I missing or not looking at? https://drive.google.com/file/d/1A5tw_qqCgfD-SkLD6Hk5EJgdSeMqz3jF/view?usp=drive_link Quote Link to comment Share on other sites More sharing options...
Vaughan Posted July 7 Report Share Posted July 7 That link requires requested access, please make another link that is open access Quote Link to comment Share on other sites More sharing options...
duncan351 Posted July 7 Author Report Share Posted July 7 sorry. I hate google drive. Its unlocked now Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 8 Report Share Posted July 8 4 hours ago, duncan351 said: Problems occurred shortly after 1:50secs. You will see the throttle is 100% but rpms are barely moving Is this the right log? At 1:50 in this log you are cruising steady at 3200RPM, 30% throttle. If you are talking about the patch at 5:31, then this is caused by a gear shift cut. Quote Link to comment Share on other sites More sharing options...
duncan351 Posted July 9 Author Report Share Posted July 9 No Sir, please try this log https://drive.google.com/file/d/1qTfmmsS2YLmEei139Im1lLF7gppvZYFQ/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 10 Report Share Posted July 10 The same problem is apparent in this log, it is a gear shift cut at 1:51. If you are not expecting a gear shift cut at that point then check the start shift settings or lockouts that you have set. Quote Link to comment Share on other sites More sharing options...
duncan351 Posted July 13 Author Report Share Posted July 13 On 7/9/2024 at 7:39 PM, Adamw said: The same problem is apparent in this log, it is a gear shift cut at 1:51. If you are not expecting a gear shift cut at that point then check the start shift settings or lockouts that you have set. Thanks Adam, I have fixed the problem. I do have another question. I hate to bother people like yourself when I can't find the proper parameters to identify my issue when everything I can't think of at the moment of ever parameter to locate my issue(s). Are you using a utility or do you have log templet by chance? Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 14 Report Share Posted July 14 My layout would be pretty similar to the ones shared here: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.