neil brown Posted May 23, 2015 Report Share Posted May 23, 2015 got my link display that was sent to yourself for a repair  now it turned itself off, when car was running and display powers up and shows link display then disappears and end up with lines  it had a new main pcb board, new lcd, new cables and ll tested and flashed with latest firmware by sam at christchurch  it has only been used for about 7 months and only as a weekend car  is this covered by warranty and any spare parts for the units left  img_0156.mov Quote Link to comment Share on other sites More sharing options...
neil brown Posted May 23, 2015 Author Report Share Posted May 23, 2015 any other displays that will work with the g4 storm ecu (can is not enabled as ecu serial number is under 10000) Quote Link to comment Share on other sites More sharing options...
neil brown Posted May 24, 2015 Author Report Share Posted May 24, 2015 a bit thanks to sam at service for quick reply to email  all sorted now  just out of interest how much to enable can set up on a g4 storm Quote Link to comment Share on other sites More sharing options...
Simon Posted May 25, 2015 Report Share Posted May 25, 2015 CAN upgrade is free we just ask for the freight costs to be covered. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.