innovate lc2 saftey limiter

[Ross gardiner]

hi i have just installed an innovate LC2 and i want to set it to put the car in a saftey mode if the afr ratio gets to a unsafe level but

giving the fact that it would need a start up delay and could i get some advice be great thanks 

o and i see on a previous forum that the LC1 setting will work with the LC2 is this correct 

thanks Ross

[Simon]

You could use a GP limit table to limit if the AFR goes too lean.

The GP limits have a delay as part of the settings.

Yes the LC2 and LC1 calibrations match.