Lawrence martin Posted March 27, 2012 Report Share Posted March 27, 2012 Hi since the latest software I can np longer use the closed loop lambda using the target afr table as the target for the closed loop adjustment I only get stoich and stoitch wideband is there no way to bring this back Quote Link to comment Share on other sites More sharing options...
Scott Posted March 29, 2012 Report Share Posted March 29, 2012 Hi Lawrence, I am assuming you used to use 'auto' mode for CLL? In the latest software this has been renamed 'Stoich mode (Wideband)'. The settings are identical apart from Stoich mode(Wideband) not having the AN Channel field. This is because in the same release we have made CLL look at the wideband average instead. If you only have one wideband sensor on your setup, then the wideband average will read the same, but for setups with multiple wideband sensors (one on each bank for example) the CLL will work better with the average value. Hope this clears things up, if you do want it how it was previously you can always go back to the previous version of firmware you were on. Best regards, Scott. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.