Dadoulis Paschalis Posted March 19, 2012 Report Posted March 19, 2012 Hi all!! A little weird problem occured from the begining with the TPS when pushing the pedal to 100% and keep it there it reverts back to 10% Even if I setup it half the pedal to show 100% and hold it there, it goes back to 10%! This happens only if I push it to 100%, even if I am at 98% it's not malfunctioning!! Only at 100%!! Any ideas? Al this is happening in a starlet 4efte! Thanks! Quote
Scott Posted March 19, 2012 Report Posted March 19, 2012 Hi, Have a look at your Analog Input fault settings and see what value you have set for your TPS channel, If you are outside the set limits and your error value is set to 10.0% this situation will occur. Regards, Scott. Quote
Dadoulis Paschalis Posted March 20, 2012 Author Report Posted March 20, 2012 Thanks a lot!! Working fine now!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.