BMWRallycross Posted December 17, 2012 Report Posted December 17, 2012 I have a rallycross car and wheelspeed sensors is not allowed. I would like to to have an option with an 3D table that is not speed sensitive. I want to use an voltage switch to choose different rpm and an timer on the other axis. Quote
Simon Posted December 18, 2012 Report Posted December 18, 2012 Hi Niklas That can be done on the current firmware. Just select the 3D option for the launch and then configure the axis to suit. Quote
BMWRallycross Posted December 23, 2012 Author Report Posted December 23, 2012 I tried that earlier but as soon as I released the launch button it disarmed. Today I tried again and configured an virtual aux with the timer and it works now. But I cant get the arming time to work it arms immediately whatever arming time I set. Quote
Simon Posted January 9, 2013 Report Posted January 9, 2013 Can you send through you full map and we can have a look on the bench at its configuration. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.