James Supra Posted May 23, 2012 Report Share Posted May 23, 2012 I'm wanting to know if it is possible to use six channels for igniter, and have some coil on plug coils which are wired to ecu using ground power and triggering from each but still run in the wasted spark on a six clyinder. How could this be setup if its possible? Perhaps spilt the three output drives to pairs and have a channel for each igniter? Thanks Quote Link to comment Share on other sites More sharing options...
Scott Posted May 23, 2012 Report Share Posted May 23, 2012 Hi James, It it indeed possible. Have a read over this: http://www.linkecu.com/support/documentation/technical-drawings/I24%206%20Cylinder%20Single%20Post%20Wasted%20Spark%20Example.pdf Note that your actual wiring connections will depend on your firing order. Also look in PCLink under help for a table that can help you work out your connections. It can be found under PCLink Help > Wiring Information > Output Wiring > Ignition Drives > Multi-Coil Wasted Spark Ignition... Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.