James Wingfield Posted August 25, 2008 Report Share Posted August 25, 2008 I'm thinking of setting up a water injection kit and was thinking about making the WI rate proportional to the fuel injection rate. I was just wondering what the injector drivers actually output as I'm hoping to tap into this signal and use it to drive the WI as well. Thanks, Wingers Quote Link to comment Share on other sites More sharing options...
James Wingfield Posted August 25, 2008 Author Report Share Posted August 25, 2008 Sorry - forgot to say, its an LEM G3 Cheers! Quote Link to comment Share on other sites More sharing options...
Simon Posted September 1, 2008 Report Share Posted September 1, 2008 They switch to ground. With an injector connected you will see 0-12V switched. 0 volts when injector is open and 12 volts when its closed. Quote Link to comment Share on other sites More sharing options...
James Wingfield Posted September 3, 2008 Author Report Share Posted September 3, 2008 thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.