Jump to content

Link plus won't prime


Benjamin Leu
 Share

Recommended Posts

 Hi, I have a 91 dodge stealth rt tt that came with the link plus standalone installed. It has the breakout loom included so it isn't wired in, but I can't seem to figure out how to get the fuel pump to prime.  

I have everything ready on the car but I can't get any fuel pressure to set my fuel pressure regulator to the right psi. if I could be certain that the  fuel pump was actually getting power then I could probably figure it out.

I'm at the end of my wits and need some help.

Anyone have any ideas? 

Link to comment
Share on other sites

The ECU primes the fuel pump at power up for 3 seconds by switching to ground on the control wire.

You can manually power the pump by providing a ground to the fuel pump control wire, this should turn on the relay and activate the pump.

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...