Anders Reineborg Posted February 24, 2015 Report Share Posted February 24, 2015 Hi I have a Audi egt sensor that runs on 12volts, is it possible to get the readings for this into the link g4+ extreme ecu? Or do i have to get another egt to get the readings? Quote Link to comment Share on other sites More sharing options...
Simon Posted February 25, 2015 Report Share Posted February 25, 2015 Is it a 12V output? Or is the sensor powered by 12V and has a different output? Quote Link to comment Share on other sites More sharing options...
Anders Reineborg Posted February 25, 2015 Author Report Share Posted February 25, 2015 It is powered by 12v i don't know what the output is and i don't know how the measure it either? Quote Link to comment Share on other sites More sharing options...
Simon Posted February 25, 2015 Report Share Posted February 25, 2015 You will be able to measure it with a volt meter. If its an amplified signal then you should se a 0-5V signal. This could then be fed directly into the ECU on an AN volt channel. Quote Link to comment Share on other sites More sharing options...
Anders Reineborg Posted February 26, 2015 Author Report Share Posted February 26, 2015 Allright, should i measure between signal (an volt) and ground? Quote Link to comment Share on other sites More sharing options...
Simon Posted February 26, 2015 Report Share Posted February 26, 2015 Yep spot on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.