Sensor calibration

[Steve Bull]

Just starting to program all the settings on the xtreme ecu. All my sensors are the 5 volt type, well they are all the outputs from my PLX gauges. The thing is I'm not too sure on the MAP sensor, as the PLX goes from vacume (-15 psi) to boost (+30 psi). Is the ecu set up on absolute pressure, ie that normal pressure is at aproximatly 15psi and not 0. So at 1 bar of boost the ecu works on 2 bar absoulte. Also is there any wiring diagrams to set up the 1uzfe vvti engine, Any thing would be a help.

[Simon]

For sensor inputs its in absolute so 0kpa is in this case -15psi and 30psi is equivalent to 300Kpa

http://www.linkecu.com/support/documentation/technical-drawings/G08