Jump to content

Subaru EG33 wiring guide


David Bush
 Share

Recommended Posts

  • 2 months later...

Previously David Bush wrote:

Does anybody have a wiring diagram for hooking up a g3 to a Subaru eg33? Or at least info regarding how to wire up the two crank sensors? Thanks.

You use the 12 tooth sensor, which is offset by around 60 degrees. You just input this into the Link. Also the EG33's need about 350% extra fuel to start when cold which is crazy. All my EJ's only used 50-70% extra fuel when cold. A few settings under trigger setup: Multitooh position: Crank Trigger mode: Multi-tooth Trigger Priority: Trig 1 Tooth count: 12 Sync Pulse: Cam I have tuned maps up to 325 kw atw for the link G3 and a heap of info: bazzasti at gmail.com also my youtube channel: www.youtube.com/bazzasti

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...